DJI Zenmuse P1
The DJI Zemuse P1 is designed for photogrammetry flight missions, taking efficiency and accuracy to a whole new level. It incorporates a full-frame sensor with interchangeable fixed focal length lenses on a 3-axis stabilized gimbal. With the P1, it is possible to cover up to 7.5km2 in one day of acquisition.
45MP Full-frame Sensor
Pixel Size: 4.4
Photo capture every 0.7s during flight
Weight: Approx 800g
CAN BE USED AT TEMPERATURES FROM -20 ° C to + 50 ° C
Absolute accuracy: Horizontal: 3cm Vertical: 5cm
Aperture range: f / 2.8-f / 16
Klau PPK 7700C
The Klau PPK 7700C is a high precision GPS module allowing to refine the precision of the spatial localization of aerial images and thus to optimize the process of photogrammetry. It is a solution that includes an external module and software developed by surveyors and geomaticians who are experts in photogrammetry for industry professionals. This drone photogrammetry method will allow you to: reduce the number of ground control points to achieve absolute data accuracy of around 2 to 3 cm in XYZ; increase the security of the readings as you do not have to walk the entire site to install checkpoints; reduce the lateral overlap to 40%, which allows to cover between 1.5 to 2 x more ground in a single flight; connect directly to the geodetic networks of permanent stations in PPP mode; increase the processing speed, because you only have to download your raw GNSS data and using the software the positioning will be corrected in just a few clicks.
Designed for LiDAR integrators and IoT development
It connects to various IMU / INS products, Vectornav, Honeywell, Pixhawk and more
Time synchronization and recording of consolidated data
Optimized PPP for high precision positioning without a base station
IMU processing coupled on desktop or cloud
Supports PPK, PPP NRT and PPP RT
No items found.
No items found.